New Equipment  - Search Result

Paper Knurling Machine RHC-520

Paper Knurling Machine RHC-520 Features: Working speed: 0-130m/min, Pneumatic unwind roll lift, Max. Unwind Diameter: 1200mm, Magnetic tensioning control, Honeycomb paper knurling, Electronic web guide, 3" air shafts for wind and unwind, Max. Roll width: 520mm, Weight: 2640 lbs, Power: 220 Volts 3 Phase 60Hz 6.5kW, Max. Rewind Diameter: 240mm, Dimensions: 2900 x 1900 x 1500 mm, Cutting method: 142x520mm Upper knife roller + 144x520 mm Lower knife roller.

Plastic Lid Making Machine   RP-420S

Plastic Lid Making Machine RP-420S Features: Water consumption: 60Liters/hr, Voltage: 220 Volts 3 Phase 60 Hz, Suitable material: HIPS/PVC/PET, Required sheet width: 430mm, Required sheet thickness: 0.15-0.5mm, Punching frequency: 8-32cycles/min, Power: 10KW, Max. forming depth: 50mm, Max. forming area: 410x300mm, Dimensions: 2700 x 830 x 1450 mm, Weight: 1000kg, Air pressure: 0.4-0.7MPa, Air consumption: 0.6-0.8m³/min, Waste rewinding, Roll-fed, Hole or cross-punching, Heat and vacuum forming.

Compressor RHB-5A

Compressor RHB-5A Features: Power: 4KW/5HP, Power: 220V/60HZ/3PH, Air tank: 300L, Air pressure: 8 bar, Air flow: 0.55 m3/min, Screw Compressor, Pressure releaf valve, Electronic drain valve, Air Filter, Refrigerated Compressed Air Dryer, Modular tank included.

Partition Making Machine RPC-1000

Partition Making Machine RPC-1000 Features: Speed: 120 pcs/min, Slotting width: 3.5mm 5mm 7mm, Power: 220 Volts 3 Phase 60Hz 1.1kW, Min. slotting distance: 40mm, Dimensions: 1500 x 1450x 1300 mm, Automatic back kick feeding, 9 groups of slotting knives, Vacuum-assisted automatic bottom feeder, Upper and lower slot knife side-to-side adjustment, Speed is controlled via a frequency converter, Max. corrugated board size: 1000 x 300 mm, Full-size conveyor belt, Cardboard stacking tray, Adjustable slot depth, 360-degree slotted phase adjustment.

Cutting Plotter RZCRT-3016E

Cutting Plotter RZCRT-3016E Features: Total Power: 9.0kW 220V 50/60Hz, Score/creasing tool, Suggested HS code: 8441.10.0000, Plotting Pen, Motor & Transmission: Servo motor with guided rail and synchronous belt, Materials: Cardboard paper PP plastic EVA magnetic corrugated board, Machine Language: HP-GL and GP-GL, Material hold down: Via vacuum, Functions: Full cut kiss cut half cut drawing and marking, Folding Carton Samplemaker, File Format: Standard DXF PLT and HPGL, Cutting Thickness: 0.5-25 mm, Cutting Speed: Straight line up to 3000mm/sec, Compatibility: AutoCAD CorelDraw Optitex Shoemaster RECAD Gerber etc., Working area: 3000 x 1600mm, Electric oscillating tool, Dimensions: 2480 x 1760 x 1540 mm, Cutting Speed: Straight line up to 1200mm/sec, Camera, Accuracy: +/-0.1mm, Touch screen LCD, Software resolution: 0.025mm, Machine resolution: 0.01mm, Divisional vacuum absorption, Air pump power: 9kw.

Pallet Jack RYC-HYD

Pallet Jack RYC-HYD Features: Power: 220V 50/60Hz, Suggested HS code: 8439.30.0000, Min. height: 85 mm, Max. load capacity: 3000 Kilos, Integral battery charger, battery level gauge, and emergency battery disconnect, Fork width: 220 mm, Fork length: 1160 mm, Electric forward and reverse with infinite adjustment, Electric & hydraulic lift, Max. height: 115 mm.

Cutting Plotter RT-1100

Cutting Plotter RT-1100 Features: Compatibility: AutoCAD CorelDraw Optitex Shoemaster RECAD Gerber etc., Accuracy: +/-0.1mm, Pertinax milling machine, Motor & Transmission: Servo motor with guided rail and synchronous belt, Material hold down: Via vacuum, Machine Language: HP-GL and GP-GL, File Format: Standard DXF PLT and HPGL, X Y Z axis travel: 1100 x 1080 x 90 mm, Working area: 1600 x 1800mm, Weight: 900 kg NW, Suggested HS code: 8441.10.0000, Cutting Thickness: 0.5-18 mm, Cutting Speed: Straight line up to 10 meters/min, 2.5KW 60000rpm Spindle.

Wide Flexo Press RPF-1300

Wide Flexo Press RPF-1300 Features: Max. printing width: 49.5", Plate mounting machine with camera, Photopolymer thickness: 1.14 1.7 2.28 2.84 & 3.94mm, Automatic flexo plate mounting machine.

Card cutting and collating machine RFQ-1020

Card cutting and collating machine RFQ-1020 Features: Weight: 9500 Kg, Total Power: 16.5 kW, Paper thickness: 128-450 gsm, Min. paper size: 470 x 360 mm, Max. speed: 3000 sheets/hour, Max. paper size: 1000 x 730 mm, Max. card size: 91 x 66 mm, Unique collection method of cards that guarantees the order of the deck, Inline packing or wrapping (optional), Dimensions: 244" x 249" x 73", Designed to cut paper or plastic sheets into cards with inline corner punching, Automatic card slitting and collating machine, Applicable paper format: 545 x 545 808 x 720 & 897 x 662 mm.

CTP RHDI-1600

CTP RHDI-1600 Features: Weight: 3307 lbs, Power: 8.5 kW, Max. plate size: 60" x 50", Dimensions: 90.94" x 57.08" x 44.88", Voltage: 220V Single Phase 50/60Hz, Thermal, Suitable for digital flexographic and photopolymer plates, Speed: Up to 2.5 m2/hour, Recommended operating temperature: 65-75 Farhrenheit, Resolution: 2400/4000 dpi, Recommended operating humidity: 20-70% (Without condensation), Min. plate size: 4" x 5", Manual plate load and unloading, Flexo CTP, 830nm laser, 32 Infrared laser diodes, 1-bit tiff interface RIP Included.

CTP RHDI-1200

CTP RHDI-1200 Features: Voltage: 220V Single Phase 50/60Hz, Thermal, Suitable for digital flexographic and photopolymer plates, Speed: Up to 2.5 m2/hour, Recommended operating temperature: 65-75 Farhrenheit, Resolution: 2400/4000 dpi, Recommended operating humidity: 20-70% (Without condensation), Min. plate size: 4" x 5", Manual plate load and unloading, Flexo CTP, 830nm laser, 32 Infrared laser diodes, 1-bit tiff interface RIP Included, Max. plate size: 39.37" x 50", Dimensions: 90.94" x 57.08" x 44.88", Power: 8.5 kW, Weight: 3307 lbs.

CTP RHDI-1100

CTP RHDI-1100 Features: Thermal, Suitable for digital flexographic and photopolymer plates, Recommended operating temperature: 65-75 Farhrenheit, Speed: Up to 2.5 m2/hour, Resolution: 2400/4000 dpi, Recommended operating humidity: 20-70% (Without condensation), Min. plate size: 4" x 5", Manual plate load and unloading, Flexo CTP, 830nm laser, 32 Infrared laser diodes, 1-bit tiff interface RIP Included, Weight: 2750 lbs, Voltage: 220V Single Phase 50/60Hz, Max. plate size: 40.00" x 30", Dimensions: 82.68" x 42.28" x 37.80" mm, Power: 7.5 kW.

CTP RHDI-800

CTP RHDI-800 Features: Weight: 1980 lbs, Resolution: 2400/4000 dpi, Speed: Up to 2.5 m2/hour, Thermal, Recommended operating temperature: 65-75 Farhrenheit, Min. plate size: 4" x 5", Max. plate size: 31.50" x 25", Flexo CTP, Dimensions: 69.75" x 40" x 35.50" mm, 830nm laser, 32 Infrared laser diodes, Voltage: 220V Single Phase 50/60Hz, Suitable for digital flexographic and photopolymer plates, Recommended operating humidity: 20-70% (Without condensation), Manual plate load and unloading, 1-bit tiff interface RIP Included, Power: 5.5 kW.

Cold & Hot Glue Applicator RH01-HF

Cold & Hot Glue Applicator RH01-HF Features: Touch screen LED display, Spray controller, Number of spray guns: Up to 4, Number of optical sensors: Up to 4, Fully programable pattern with memory, Power: 600W, Adhesive pressure: 5-20 Bars, Accuracy: +/-1 mm at 100 meters/min, Max. operating temperature: 220C / 392F, Hot melt adhesive spray gun, Hot melt adhesive feeding unit.

Slitter Rewinder RSR-1600

Slitter Rewinder RSR-1600 Features: Working speed: 100m/min, Total weight: 6600lbs, Total Power: 10 kW, Slitting width: > 30 mm, Max. Unwind Diameter: 1000mm, Max. Roll width: 1600mm, Max. Rewind Diameter: 1000mm, Dimensions (LxWxH): 4800 x 2850 x 1600 mm, Pneumatic paper tensioning control, 3" air shafts for wind and unwind.

Paper Bag Making Machine RTF-1100AT

Paper Bag Making Machine RTF-1100AT Features: Square bottom bag making machine, Top folding (Neck reinforcement): 30-70 mm, Speed: 0-70 pcs/min, Side folding (Gusset): 60-180 mm, Sheetfed paper bag-making machine, Paper Bag Width: 100-410 mm, Paper Bag Length: 200-580 mm, Laminated paper thickness: 157-350 gsm, Kraft paper thickness: 120-300 gsm, Min. paper size: 320 x 300 mm, Max. paper size: 1060 x 600 mm.

Tape Applicator RPA-50E

Tape Applicator RPA-50E Features: Working speed: 10-20 Cartons/min, Max. Carton size: 150-Unlimited x 150-500mm W x 120-500mm H, Left and Right Belt Driven Carton Sealer, Flap closer & sealer, Carton tape sealer, Adjustable Case Sealer, Total weight: 125kg, Power: 240W, Discharge table height: 600-720mm, Dimensions: 850x850x1350 mm, Conveyor speed: 18m/min, Adhesive tape width: 48/60/75mm, Power supply: 220V 50/60HZ 1 Phase.

Pouch Sachet Making Machine RMIC-600TZ

Paper Cup Making Machine RDW-22 Features: Ultrasonic welding, Sensor detection system, Sleve welding: Ultrasonic, Safety cage, Open Cam, Net Weight: 2400 KG, Multi-cup collector with chute delivery, Water-based glue spray on the inside of the sleeve, Automatic oil lubrication, Min. Air pressure: 60-90 psi - Air output: 3.5-11 ft3/min, Speed: 70-80 pcs/minute, Power: 5KW, Paper Cup Size: 4-16 oz, Material: Single PE coated paper, Machine size (L*W*H): 98.5" x 43.5" x 67" mm, Direct sleeve gluing option for embossed or corrugated sleeve, Auto suction of inverted cup and sleeve gluing, Auto bottom folding (for hollow sleeve cup), Material: 150-350 gsm single PE coated or printed paper.

Roll Sheeter RCM-1100A-1

Roll Sheeter RCM-1100A-1 Features: Suggested HS code: 8441.10.0000, Rotary upper knife and fixed lower knife, Self Adjusting Air Brakes, Rotary Knife, Paper tensioning control, Overlapper & piler, Waste Bag Extraction, Color LCD operating panel, Auto cut length adujstment system, 1x Roll Stand, Max. Cutting Speed: 300 cuts/min, Total Weight: 9000kg, Paper thickness: 60-550 gsm, Max. Paper Width: 1100mm, Hydraulic shaftless mill roll stands, Dimensions: 7831 x 2151 x 1850 mm, Delivery pile height: 1300mm, Cut-off range: 18-55", Cut off tolerance: +/- 0.1-0.5mm.

About Us

Gestionamos toda clase de requerimientos que las nuevas tecnologías impongan en el mercado a las pymes que lo soliciten, e igualmente a las personas naturales en el área de impresión.

Somos su mejor aliado cuando piense en adquirir impresoras usadas, guillotinas, plegadoras, troqueladoras, pegadoras de cajas, convertidoras y muchos otros equipos para las artes gráficas, a precios y calidad altamente competitivos; asegurando de esa forma, la completa satisfacción del cliente. Nuestra red mundial de contactos permite a nuestro equipo de ventas responder rápidamente a cualquier solicitud de incluyendo los siguientes equipos y marcas: Impresoras usadas Heidelberg, Komori, Roland, guillotinas Polar, plegadoras Stahl y MBO, troqueladoras Bobst, equipos de terminado Müller Martini, Kolbus entre otros.